![]() ![]() Netgear router may require NMRP instead of TFTP. See this wiki page: Asus TFTP Flash Special Netgear NMRP Flashing Procedures Some routers like the Asus WL-500xx series (WL-500G, WL-500G Premium, WL-500W, WL-500G Deluxe), need additional steps to perform a complete and proper initial flash. Read about timing problems below: TFTP flash#Special for Vista, Win7 and Win 2008.If the router isn't responding, it is soft-bricked (use OEM firmware) TTL=64 means application code has been reached.Plug in the router and start the TFTP client as soon as there is a TTL=100 ping response.Setup the TFTP client, then start a continuous ping ( -t switch is needed for this in Windows) to the router.Use a mini build for 4+ MB flash devices (when possible) or micro build for 2 MB flash devices.For recovering a bad flash, the OEM firmware might be required. ![]() Use the Supported_Devices, the device wiki, or the forum for recommended files. Set a fixed IP address on the PC with the same network as your router, e.g. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |